Tunable circularly polarized luminescence behaviors caused by the structural symmetry of achiral pyrene-based emitters in chiral co-assembled systems.

The regulation of circularly polarized luminescence (CPL) behavior is of great significance for practical applications. Herein, we deliberately designed three achiral pyrene derivatives (Py-1, Py-2, and Py-3) with different butoxy-phenyl substituents and the chiral binaphthyl-based inducer (R/S-B) with anchored dihedral angle to construct chiral co-assemblies, and explored their induced CPL behaviors. Interestingly, the resulting co-assemblies demonstrate tunable CPL emission behaviors caused by the structural symmetry effect of achiral pyrene-based emitters during the chiral co-assembly process. And in spin-coated films, the dissymmetry factor (gem) values were 9.1 × 10-3 for (R/S-B)1-(Py-1)10, 5.6 × 10-2 for (R/S-B)1-(Py-2)7, and 8.6 × 10-4 for (R/S-B)1-(Py-3)1, respectively. The strongest CPL emission (|gem| = 5.6 × 10-2, λem = 423 nm, QY = 34.8 %) was detected on (R/S-B)1-(Py-2)7 due to the formation of regular and ordered helical nanofibers through the strong π-π stacking interaction between the R/S-B and the achiral Py-2 emitter. The strategy presented here provides a creative approach for progressively regulating CPL emission behaviors in the chiral co-assembly process.

Efficient Red-to-Blue Triplet-Triplet Annihilation Upconversion Using the C70-Bodipy-Triphenylamine Triad as a Heavy-Atom-Free Triplet Photosensitizer.

Triplet-triplet annihilation upconversion (TTA-UC) with heavy-atom-free organic triplet photosensitizers has attracted extensive attention recently, however, the successful examples with absorption in red and first near-infrared (NIR-I, 650-900 nm) region are still insufficient. Herein, we conducted a new TTA-UC system of perylene using C70-bodipy-triphenylamine triad (C70-BDP-T) as the heavy-atom-free photosensitizer. Efficient red-to-blue (663 to 450 nm) TTA-UC was achieved in this system with an anti-Stokes shift of 0.88 eV and a quantum yield up to 5.2% (out of a 50% maximum) in deaerated toluene. Notably, this is the highest quantum yield to date in similar TTA-UC systems with heavy-atom-free organic photosensitizers. Using steady-state and transient absorption spectroscopy, together with cyclic voltammogram and quantum chemical calculations, photophysical and photochemical mechanisms were elucidated. Specifically, two triplet triads, C70-3BDP*-T and 3C70*-BDP-T, were produced efficiently upon photoexcitation, with lifetimes of 2.0 ± 0.1 and 32.2 ± 0.3 µs, respectively. Electron transfer and recombination mechanisms were confirmed to play crucial roles in the formation of these triplets, instead of intersystem crossing. Our results shed light on the superiority of fullerenes in the development of heavy-atom-free photosensitizers.

Broadband Visible Light-Absorbing [70]Fullerene-BODIPY-Triphenylamine Triad: Synthesis and Application as Heavy Atom-Free Organic Triplet Photosensitizer for Photooxidation.

A broadband visible light-absorbing [70]fullerene-BODIPY-triphenylamine triad (C70-B-T) has been synthesized and applied as a heavy atom-free organic triplet photosensitizer for photooxidation. By attaching two triphenylmethyl amine units (TPAs) to the π-core of BODIPY via ethynyl linkers, the absorption range of the antenna is extended to 700 nm with a peak at 600 nm. Thus, the absorption spectrum of C70-B-T almost covers the entire UV-visible region (270-700 nm). The photophysical processes are investigated by means of steady-state and transient spectroscopies. Upon photoexcitation at 339 nm, an efficient energy transfer (ET) from TPA to BODIPY occurs both in C70-B-T and B-T, resulting in the appearance of the BODIPY emission at 664 nm. Direct or indirect (via ET) excitation of the BODIPY-part of C70-B-T is followed by photoinduced ET from the antenna to C70, thus the singlet excited state of C70 (1C70*) is populated. Subsequently, the triplet excited state of C70 (3C70*) is produced via the intrinsic intersystem crossing of C70. The photooxidation ability of C70-B-T was studied using 1,5-dihydroxy naphthalene (DHN) as a chemical sensor. The photooxidation efficiency of C70-B-T is higher than that of the individual components of C70-1 and B-T, and even higher than that of methylene blue (MB). The photooxidation rate constant of C70-B-T is 1.47 and 1.51 times as that of C70-1 and MB, respectively. The results indicate that the C70-antenna systems can be used as another structure motif for a heavy atom-free organic triplet photosensitizer.

Robust, Lightweight, Hydrophobic, and Fire-Retarded Polyimide/MXene Aerogels for Effective Oil/Water Separation.

Polyimide (PI) aerogels have attracted great attention owing to their low density and excellent thermal stability. However, hydrophobic surface modification is required for PI aerogels to improve their ability in oil/water separation due to their amphiphilic characteristic. Two-dimensional MXenes (transition metal carbides/nitrides) can be utilized as nanofillers to enhance the properties of polymers because of their unique layered structure and versatile interface chemistry. Herein, the robust, lightweight, and hydrophobic PI/MXene three-dimensional architectures were fabricated via freeze-drying of polyamide acid/MXene suspensions and thermal imidization. Polyamide acid was synthesized using N-N-dimethylacetamide and 4,4'-oxydianiline. MXene (Ti3C2Tx) dispersion was obtained via the etching of Ti3AlC2 and ultrasonic exfoliation. Taking advantage of the strong interaction between PI chains and MXene nanosheets, the interconnected, highly porous, and hydrophobic PI/MXene aerogels with low density were fabricated, resulting in the improved compressive performance, remarkable oil absorption capacity, and efficient separation of oil and water. For the PI/MXene-3 aerogel (weight ratio, 5.2:1) without any surface modification, the water contact angle was 119° with a density of 23 mg/cm3. This aerogel can completely recover to its original height after 50 compression-release cycles, exhibiting superelasticity and exceptional fatigue-resistant ability. It also showed high absorption capacities to various organic liquids ranging from approximately 18 to 58 times of their own weight. This hybrid aerogel can rapidly separate the chloroform, soybean oil, and liquid paraffin from the water-oil system. The thermally stable hybrid aerogel also exhibited excellent fire safety properties and outstanding reusability under an extreme environment.

Interface decoration of exfoliated MXene ultra-thin nanosheets for fire and smoke suppressions of thermoplastic polyurethane elastomer.

Thermoplastic polyurethane (TPU) has broad applications as lightweight materials due to its multiple advantages and unique properties. Nevertheless, toxicity emission under fire conditions remains a major concern, particularly in building fire scenarios. To circumvent the problem, it is imperative that an effective flame retardant is sought to suppress the flame and release of combustion/smoke products whilst maintaining the favorable material properties of TPU. In the current work, a simple method is proposed for the preparation and utilization of cetyltrimethyl ammonium bromide (CTAB) and tetrabutyl phosphine chloride (TBPC) modified Ti3C2 (MXene) ultra-thin nanosheets. During the cone calorimeter tests, significant reduction in peak heat release rate (51.2% and 52.2%), peak smoke production rate (57.1% and 57.4%), peak CO production (39.4% and 41.6%) and peak CO2 production (49.7% and 51.7%) were recorded by the mere introduction of 2 wt.% CTAB-Ti3C2 and TBPC-Ti3C2 to TPU. These superior fire safety properties resulting from the significant reduction of the fire, smoke and toxicity hazards are attributed to the excellent dispersion, catalytic and barrier effect of Ti3C2 ultra-thin nanosheets in TPU. Future applications of exfoliated MXene nanosheets as flame retardant appear to be very promising.

Novel 3D Network Architectured Hybrid Aerogel Comprising Epoxy, Graphene, and Hydroxylated Boron Nitride Nanosheets.

A novel three-dimensional (3D) epoxy/graphene nanosheet/hydroxylated boron nitride (EP/GNS/BNOH) hybrid aerogel was successfully fabricated in this study. This was uniquely achieved by constructing a well-defined and interconnected 3D network architecture. The manufacturing process of EP/GNS/BNOH involved a simple one-pot hydrothermal strategy, followed by the treatment of freeze-drying and high-temperature curing. In comparison with EP/GNS-3, EP/GNS/BNOH-3 demonstrated improvement of 97% for compressive strength at 70% strain. Through compression tests, fracture occurred for EP/GNS-3 at ninth compression cycles, whereas EP/GNS/BNOH-3 retained its original form after twenty compression cycles, with a residual height of 97% (i.e., only 3% reduction). By the addition of BNOH in the polymer matrix, the dynamic heat transfer and dissipation rates of EP/GNS/BNOH aerogels were also considerably reduced, indicating that the aerogel with BNOH additive possessed excellent thermal insulation properties. Thermogravimetric analysis results revealed that the thermal stabilities of EP/GNS and EP/GNS/BNOH aerogels were improved with increasing loading of EP, and EP/GNS/BNOH aerogels exhibited a better thermal stability at high temperatures. Through the elevated levels attained in the compressive strength, superelasticity, and thermal resistance, EP/GNS/BNOH aerogels has the great potential of being a very effective thermal insulation material to be utilized across a board range of applications in building, automotive, spacecraft, and mechanical systems.

Comparative Studies on Thermal, Mechanical, and Flame Retardant Properties of PBT Nanocomposites via Different Oxidation State Phosphorus-Containing Agents Modified Amino-CNTs.

High-performance poly(1,4-butylene terephthalate) (PBT) nanocomposites have been developed via the consideration of phosphorus-containing agents and amino-carbon nanotube (A-CNT). One-pot functionalization method has been adopted to prepare functionalized CNTs via the reaction between A-CNT and different oxidation state phosphorus-containing agents, including chlorodiphenylphosphine (DPP-Cl), diphenylphosphinic chloride (DPP(O)-Cl), and diphenyl phosphoryl chloride (DPP(O3)-Cl). These functionalized CNTs, DPP(Ox)-A-CNTs (x = 0, 1, 3), were, respectively, mixed with PBT to obtain the CNT-based polymer nanocomposites through a melt blending method. Scanning electron microscope observations demonstrated that DPP(Ox)-A-CNT nanoadditives were homogeneously distributed within PBT matrix compared to A-CNT. The incorporation of DPP(Ox)-A-CNT improved the thermal stability of PBT. Moreover, PBT/DPP(O3)-A-CNT showed the highest crystallization temperature and tensile strength, due to the superior dispersion and interfacial interactions between DPP(O3)-A-CNT and PBT. PBT/DPP(O)-A-CNT exhibited the best flame retardancy resulting from the excellent carbonization effect. The radicals generated from decomposed polymer were effectively trapped by DPP(O)-A-CNT, leading to the reduction of heat release rate, smoke production rate, carbon dioxide and carbon monoxide release during cone calorimeter tests.

Synthesis and Properties of Axially Symmetrical Rigid Visible Light-Harvesting Systems Containing [60]Fullerene and Perylenebisimide.

Two visible light-harvesting perylenebisimide (PDI)-[60]fullerene (C60) systems, dyad P1 with one C60 unit and triad P2 with two C60 units, have been synthesized. Both systems are axially symmetrical with a rigid biphenyl linker, ensuring a relatively fixed spatial distance between the donor and acceptor, preventing through-space interaction, and enhancing energy transfer. Steady-state and transient spectroscopy, electrochemistry, as well as theoretical calculations have been used to investigate the electrochemical and photophysical properties of the two systems. Steady-state and time-resolved spectroscopy demonstrate that the excited state is featured by an efficient intramolecular energy transfer from PDI to C60. Then, the high efficient intrinsic intersystem crossing of C60 eventually leads to the production of the triplet C60. The extensive visible light absorption of PDI in the range of 400-650 nm and the final localization of the excited energy at the triplet C60 make these compounds ideal singlet oxygen inducers. Further investigation shows that the photooxidation capability for both compounds is significantly enhanced with respect to either PDI or C60 and even better than that of the commonly used triplet photosensitizer methylene blue (MB). The double C60 moieties in P2 display a better result, and the photooxidation efficiency of P2 increases 1.3- and 1.4-fold compared to that of P1 and MB, respectively. The combination of a light-harvesting unit with an intersystem crossing unit results in a highly efficient photooxidation system, which opens up a new way to triplet photosensitizer design.

Regioselective electrosynthesis of rare 1,2,3,16-functionalized [60]fullerene derivatives.

Fullerene derivatives with different addition patterns exhibit different physical, chemical, and biological properties, which are important for fullerene applications. Novel and rare 1,2,3,16-functionalized [60]fullerene derivatives having a five-membered heterocycle fused to a [5,6]-junction were obtained with high regioselectivity by electrochemical derivatization of a [60]fulleroindoline. The product structures were determined by spectroscopic data and single-crystal X-ray analysis. The obtained high regioselectivity was rationalized using theoretical calculations.

Self-decoupled porphyrin with a tripodal anchor for molecular-scale electroluminescence.

A self-decoupled porphyrin with a tripodal anchor has been synthesized and deposited on Au(111) using different wet-chemistry methods. Nanoscale electroluminescence from single porphyrin molecules or aggregates on Au(111) has been realized by tunneling electron excitation. The molecular origin of the luminescence is established by the vibrationally resolved fluorescence spectra observed. The rigid tripodal anchor not only acts as a decoupling spacer but also controls the orientation of the molecule. Intense molecular electroluminescence can be obtained from the emission enhancement provided by a good coupling between the molecular transition dipole and the axial nanocavity plasmon. The unipolar performance of the electroluminescence from the designed tripodal molecule suggests that the porphyrin molecule is likely to be excited by the injection of hot electrons, and then the excited state decays radiatively through Franck-Condon π*-π transitions. These results open up a new route to generating electrically driven nanoscale light sources.

Mechanochemistry of fullerenes and related materials.

The low or lack of solubility of fullerenes, carbon nanotubes and graphene/graphite in organic solvents and water severely hampers the study of their chemical functionalizations and practical applications. Covalent and noncovalent functionalizations of fullerenes and related materials via mechanochemistry seem appealing to tackle these problems. In this review article, we provide a comprehensive coverage on the mechanochemical reactions of fullerenes, carbon nanotubes and graphite, including dimerizations and trimerizations, nucleophilic additions, 1,3-dipolar cycloadditions, Diels-Alder reactions, [2 + 1] cycloadditions of carbenes and nitrenes, radical additions, oxidations, etc. It is intriguing to find that some reactions of fullerenes can only proceed under solvent-free conditions or undergo different reaction pathways from those of the liquid-phase counterparts to generate completely different products. We also present the application of the mechanical milling technique to complex formation, nanocomposite formation and enhanced hydrogen storage of carbon-related materials.

Synthesis and functionalization of [60]fullerene-fused imidazolines.

The silver carbonate promoted reaction of [60]fullerene with (Z)-N-arylbenzamidines afforded the unprecedented C60-fused imidazoline derivatives in high yields. Substrates with both electron-donating and -withdrawing groups on aromatic rings could be employed. In addition, the electrochemistry and further selective functionalization of the obtained C60-fused imidazolines were investigated.

Study on the thermal reactions of [60]fullerene with amino acids and amino acid esters.

Thermal reactions of [60]fullerene with a series of amino acids and amino acid esters under aerobic and dark conditions have been investigated. Fulleropyrrolidines can be obtained from these reactions although an aldehyde is not added purposely. Possible reaction mechanisms involving uncommon C-N bond cleavages have been proposed to generate aldehydes, which then react with amino acids and amino acid esters to provide azomethine ylides, followed by 1,3-dipolar cycloaddition to [60]fullerene affording fulleropyrrolidines. Control experiments support our proposed mechanisms, and elucidate the innate nature of C-N bond cleavages of amino acids and amino acid esters.

Azide addition to an endohedral metallofullerene: formation of azafulleroids of Sc3N@I(h)-C80.

The reaction of an organic azide with an endohedral metallofullerene has been investigated for the first time. Isomeric [5,6]- and [6,6]-azafulleroids can be obtained from the thermal reaction of Sc(3)N@I(h)-C(80) with 4-isopropoxyphenyl azide, while photoirradiation leads exclusively to the [6,6]-azafulleroid. An unprecedented thermal interconversion between the two isomeric azafulleroids has also been discovered.

Manganese(III) acetate-mediated radical reaction of [60]fullerene with phosphonate esters affording unprecedented separable singly-bonded [60]fullerene dimers.

Radical reaction of [60]fullerene with phosphonate esters mediated by manganese(III) acetate in chlorobenzene afforded singly-bonded fullerene dimers, of which the individual meso and racemic isomers could be unexpectedly separated out for the first time.